EN
EN CN

Product center

Focus on the production and development of high-precision indoor positioning services related hardware and software platform.

Products

Home > Products > Bluetooth Beacons > Card Electronic Tag

Bluetooth Beacons

Contact Us


Holine
086-18917148489 hzm@sh-rw.com


Tel:86-400-000-3158

Address:Unit 10, 2500Xiupu Road, Pudong new district, Shanghai



RW-T700

· Shelf Time: 2019-03-12
· Product Name: Card Electronic Tag
· Product Model: RW-T700

Email:hzm@sh-rw.com

Operating mode:

The tag operates in an "active or passive mode". The tag actively transmits a signal or is triggered by an instruction from a reader (or a low-frequency activator) to transmit a signal. The RF frequency is adjustable.

Activators distributed in various zones or inside and outside the access control have been actively transmitting low-frequency signals at a low frequency of 125 kHz. Any dual-frequency tags that pass through the activator signal range can be activated successfully. The digital number transmitted by the activator is obtained and the RSSI field strength value is calculated. The tag then transmits data such as "tag ID + tag status + activator number + RSSI value" at 2.4 GHz frequency. The adjacent 2.4GHz reader will upload the received data to the host computer with various standard interfaces such as RJ45 and RS485.



Access identification

The low-frequency 125KHz activators can be placed inside and outside the access control respectively. The effective activation range could be adjusted by changing the antenna position, adjusting the transmit power, and choosing different antenna shapes and dimensions. The tags will be activated by the activators inside and outside in turn when the tags pass through the access control. According to the activating order, the entry and exit judgment could be accurately made. Also the accurate floor location could be determined.



Real-time locating

According to the characteristics of 125KHz low frequency such as field strength RSSI value, strong penetrating power, clear boundary, easy adjustment of signal range, etc., several activators can be used for real-time locating of RTLS zones.


Communication security:

When the reader and the active tag communicate, special communication protocol is used to verify the legitimacy of the device. In order to prevent data cracking, the perfect meticulous encryption algorithm is developed to ensure data security in the communication process.


Reliability:

The product fully considers the application requirements of industrial environment such as waterproofing, dust-proof and impact-proof.



Interface standards:

It conforms to ISO18000-4 standard and specification.


Product Parameter

700 Card Electronic Tag

Recognition distance: 0 ~ 150 meters adjustable

Identification speed: 200km/h

Identification ability: 200 cards/second anti-collision performance

Identification method: omnidirectional identification

Fixed gain: 0-3 level can be selected on demand

Working frequency: 2.45GHz, 125KHz and 13.56MHz

Communication rates: 250Kb/s, 1Mb/s, 2Mb/s

Communication mechanism: based on HDLC time division multiple access and synchronous communication mechanism

Anti-interference ability: channel isolation technology, multiple devices do not interfere with each other

Security: cryptographic computation and security authentication to prevent link detection

Read/write function: 176B ~ 1K storage space (optional)

Anti-dismantle function: anti-dismantle alarm (optional)

Power consumption standard: the average working power is at the micro-watt level

Battery configuration: soft-pack lithium battery, capacity 750mAh

Service life: about 3 years, replaceable battery

Voltage detection: wireless prompt when the voltage is lower than the preset value (optional)

Packaging characteristics: ABS engineering plastics, high strength drop and vibration resistance

Environmental features: working temperature -40 ℃ ~ 85 ℃

Working humidity < 95%

Reliability: shock proof, meet the requirement of industrial environment

Shape: square card type, can provide built-in double button switch

Size: 86 x 54 x 5 mm

Weight: 18 g

Installation: double-sided adhesive tape or buckle


Related Products