Address：Room 301, Minlian Building A, No.300 Shuiyun Road, Pudong New Area, Shanghai, China.
· Shelf Time： 2019-03-12
· Product Name： 707 Card Holder Electronic Tag
· Product Model：
The tag operates in an "active or passive mode". The tag actively transmits a signal or is triggered by an instruction from a reader (or a low-frequency activator) to transmit a signal. The RF frequency is adjustable.
Activators distributed in various zones or inside and outside the access control have been actively transmitting low-frequency signals at a low frequency of 125 KHz. Any dual-frequency tags that pass through the activator signal range can be activated successfully. And the digital number transmitted by the activator is obtained. The RSSI field strength value is calculated. The tag then transmits data such as "tag ID + tag status + activator number + RSSI value" at 2.4 GHz frequency.
Compared with passive tags, the active tag has great advantages such as super strong signal and super-long recognition distance. In a good visual environment, the maximum identification range can reach 150 meters. A low-frequency 125 KHz activator can be placed respectively inside and outside the access control. The effective activation range could be adjusted by changing the antenna position, adjusting the transmit power, and choosing different antenna shapes and dimensions. The tags will be activated by the activators inside and outside in turn when the tags pass through the access control. According to the activating order, the entry and exit judgment could be accurately made. Also the accurate floor location could be determined.
According to the characteristics of 125 KHz low frequency such as field strength RSSI value, strong penetrating power, clear boundary, easy adjustment of signal range, etc., several activators can be used for real-time locating of RTLS zones.
In special applications, if danger happens, you can press the button on the back of the tag. At this very moment, the backstage monitoring software will inform the relevant person about the danger. Quick security respond will be taken.
Special communication protocol and encryption algorithm are used to verify the legitimacy of the device ensure data security in the communication process.
The production process of the reader strictly conforms to the ISO 9001 quality standard. The product fully considers the application requirements of industrial environment such as lightning protection, surge protection and anti-static. It is easy to replace the battery: battery-pressed design, tear off the sticker to easily replace the battery.
It conforms to ISO18000-4 standard and specification.
707 card electronic label
Recognition distance: 0 ~ 150 meters adjustable
Identification speed: 200km/h
Identification ability: 200 cards/second anti-collision performance
Identification method: omnidirectional identification
Fixed gain: levels 0-3 can be selected on demand
Working frequency: 2.45GHz, 125KHz, ID card, IC card, NFC (optional)
Communication rate: 250Kb/s, 1Mb/s, 2Mb/s(optional)
Communication mechanism: based on HDLC time division multiple access and synchronous communication mechanism
Anti-interference: channel isolation technology, multiple devices do not interfere with each other
Security: cryptographic computation and security authentication to prevent link detection
Gravity sensing: supported
Call for help: built-in button
Power consumption standard: the average working power is at the micro-watt level
Battery configuration: CR2032 button battery (2 PCS)
Service life: about 2 years, replaceable battery
Voltage detection: wireless prompt when the voltage is lower than the preset value (optional)
Packaging characteristics: ABS engineering plastics
Environmental features: working temperature to -40 ℃ ~ 65 ℃ Working humidity: < 95%
Reliability: shock proof, meets the requirement of industrial environment
Appearance: white square card
Installation: hanging rope
Weight: 24.8 g
Inch: 98 x 67 x 5.9 mm